Results 1 to 15 of 22
Threaded View
-
06-15-2007 09:05 AM #7
[QUOTE}my question is do these settle?[/QUOTE]
Springs do not settle. Sagging suspension is due to spring over exertion, that is stress beyond the springs limit (like hitting pot holes, or overloading the trunk with bags of cement on a Home Depot trip).
A 250# will absorb energy at a rate of #250/in.
If you put 500# on it - it will store 500# of potential energy by dropping 2 inches. This assumes the spring sits at 90 degrees.
A 30 degree offset reduces the downward force on the spring by 30%.
So now it only stores ~333 pounds of energy and drops only ~1.3 inches.
At least that's the theory behind the issue -
The experienced builders here know exactly what is needed.Last edited by SBC; 06-15-2007 at 09:15 AM.
There is no limit to what a man can do . . . if he doesn't mind who gets the credit. (Ronald Reagan)





LinkBack URL
About LinkBacks
Reply With Quote
I bought the 76 in August , but haven't been able to work on it. When I get a chance I'll post some pictures.
Corvette Resurrection?