????????32 3W door handle location????????

I want to put some outside door handles on my fiberglass 32 Ford 3 window coupe body. Can someone with an original steel 3w please measure how far down from the CENTER of the body line and how far back from the front edge of the door the FRONT mounting screw is. Thanks

Here is a pic

http://img.photobucket.com/albums/v1...r/b1d85824.jpg

http://img.photobucket.com/albums/v1...r/ec4139c2.jpg

I will ... on Thursday ...
the doors are off the 3W right now and I have them stored at another location ...

I'm sure Randy's dimensions will help. When I did mine I just eyeballed it from a picture for close. Depending on how the manufacturer of your body built the door inside and what you use for linkage might force you to juggle it some anyway.
http://www.clubhotrod.com/photopost/...=500&ppuser=32

Thursday came one day EARLY

http://hotrodders.com/journal_photos...1745116040.jpg

http://hotrodders.com/journal_photos...1745116041.jpg

Had to go to the warehouse today ... so I took the measurement a day early.

Hope this helps out ... if you something else ... just ask :3dSMILE:

Thank you very much. It is hard to tell, are the screw holes one directly above the other (verticle), or are they canted at the same angle as the front of the door edge?
Thanks again, Dennis

They are parallel to the door edge.

Thank You Very Much!

Glass the doors shut and cut off the top and be a real man

Hey Eddie.....how you doing with your Zipps problems?