I am going to run 15x6 and 15x10 on my 5 window highboy and was wondering what are the best size tires to run..
Printable View
I am going to run 15x6 and 15x10 on my 5 window highboy and was wondering what are the best size tires to run..
Not exactly the same front wheel size, but here's what I've been running for the last 7,000 miles on my High Boy.
Fronts are 15x7 Torque Thrust 2's with P195/60R15 (23" tall) BF Goodrich T/A tires. 15x10 rears with P285/70R15 (30" tall) T/A tires. They work fine, but I run the tire pressures very low and the tires squeal a little "only during braking" when you go over painted STOP lines. They show no wear pattern at all so far.
195 60 15.front
285 65 17 rear 30.5 tall
I run exactly the same as John, same wheels, same tires. I run 25 lbs in the front tires and 20 lbs in the rear tires. Works for me.Quote:
Originally Posted by John Palmer
Dumb question, but what's the idea of running such low air pressures? Better ride? On a 15x10" wheel, is there alot of sidewall "buldge" with the 285-70 15 tires? Mine has that size on the rear, but I'm not sure if my wheels are 8" or 10"... I'm thinking mine are only 8"s.
These cars are so light that lower air pressure is necessary to make the tires sit right on the road surface. Otherwise, your tires will be too rounded and only the centers will make contact with the road. It also affects ride as higher pressures will give you a harsh ride.
195/50/15 up front
and just switched to a 305/60/17 out back
I had 285/65/17
Thats what i figured the theory was... is it safe to run for prolonged intervals at 75 mph on tires with only 20 lbs of air in them?Quote:
Originally Posted by rumrumm
From what i've been able to measure with the wheels on the car, and the tires mounted, I think I have 8" wide wheels rather than 10's... as you can see there is considerable "buldge" in the sidewall, and the tread of the tire seems to actually be wider than the rim itself... Personally, I think the 285's look a little too big on the back of a highboy, and am thinking of going with some much skinnier bias-ply whites on the front and back both... I haven't really got a chance to drive the car at all yet, so i want to get some "experience" with the radials for awhile, as I heard the bias plys can be a bit squirrely compared to radials, although I do have bias plys on both my 69 Camaro and 70 Nova with no real drivability problems on either.
what brand of tire were you using on that im thinking of that size for mine ...
Quote:
Originally Posted by iceburgh
Nitto 404....they no longer make them but they are still out there. Iwanted something wider and with a 17" you are limited.Quote:
Originally Posted by godspeed32
If you still are looking contact Bob at http://www.morethantires.com/HomePage.html
they have 12 left ....he said I am only the 2nd to buy them so they are not going to sell out any time soon.
Tell him Jim from Meguiars sent you and he will take care of you and ship them to your door
You won't like the way the car handles and rides on bias plys. I have used both and radials are far superior. But if you are willing to give that up to get the period look, that is your decision. But I have a feeling those fifties-style deuce roadsters with bias ply white walls are not driven seven hours at 75 mph to the Street Rod Nationals like mine is. As far as tires getting hot with less air pressure, you have to realize that the weight of the car makes a huge difference. That is the reason why those 4500 lb. SUV's were having trouble with Firestone tires failing at low pressures. Not all the blame could be put on the tires.
I think I'd rather have a blowout at 70 mph in an SUV than a topless fiberglass roadster though.... How much lighter is a 32 ford than a modern passenger car anyhow? 2500lbs vs 3400 or so? I'm not saying I argue with the idea of running a bit less air pressure, but 20lbs seems pretty low to me...and if you have any leakage at all, you'll be running 15lbs or less before you know it. As for the bias plys, i hear ya... and thats why I haven't ordered a set of old school firestones yet, but I also always hear guys talk about how "scary" bias plys are on musclecars too, and I have put literally 1000s of miles on them with various cars and have never had a problem... I also think the weight issue could come into play here too, with a rod weighing far less than a 69 camaro, therefore inhancing the "wandering" effect of bias ply tires. I guess I'll never really know for sure til I try it. Maybe i'll just get a 2nd set of wheels and keep 2 sets mounted. Mo money... :p
On my 32 Highboy I run Michelin xzx 145 SR15s on 15x4 1/2 American Racing magnesium 12 spoke spindle mounts on the front. On the rear I have Hoosier ProStreet Radial 31-16.50-R16 on 16X13 Magnesium Halibrand Sprints. It drives and handles great. I run 35 lbs psi in the front and 12-15 psi in the rear.
I have the Wide White Bias plys on my Frazer. I am not sure what the car weighs in at, but I know that its got to be close to 4500lbs. That car is squirrley no matter what kind of road you are driving on. I have them aired up to 35lbs and they still look like they are 10-15 lbs low.
I also had an 80 Chevy pick up with 295/50/15's on it. I ran them at 18psi.
The theory behind running the radials at a lower pressure it to enhance the ride quality, and to get all of the "contact patch" of the tire on the road. If you get a set of tires, you don't always have to follow recommended specifications.
On a Hot Rod, or any other car for that matter. Take some chalk and mark a complete line across the tread of the tire and drive the car for about a block. Stop and check the pattern of chalk on the tire. If the "contact patch" is only in the center of the tire the air pressure is too high. If the wear pattern is on the outside edges of the tire, the air pressure is too low.
Adjust air pressure until the entire contact patch ears pff at the same time and you will have a smooth ride, great traction and great tire wear.
Hoosiers are an alternative if the BFGs have disappeared. They are very pricey, though.
joeybsyc. I have a Goodrich tire data book that list the rim size range for the 285/70 at 7.5" to 9.5". Cross section is listed at 11.3" on 8.5" rim. Section width varies .2" for every .5" change in rim width. A tire as small as a 225 can be run on an 8" rim according to this chart. The 295/50-15 and 295/50-16 are the only tires that should be mounted on a 10" rim. This is BFG data.
Thanks... now to go to the opposite side of that spectrum... assuming i have an 8" rim, what is the skinniest tire i can mount on it? I'm thinking of some tall WWW bias plys with as much sidewall height as i can get... from what i can tell, a L78 bias ply is the biggest 15" WWW you can get, but not sure if i need to go that big or not. Looking to give the car a traditional look..something like this:
http://www.carnut.com/cgi-bin/05/_im...rb/harb205.jpg
Try Coker Tire and see if they list that information.
I've looked at their site a zillion times, what sucks is that they use the same photos for every size tire they make in a particular model, so you can't see what they "really" look like, just a generalized photo of "sorta" what you'd get if you ordered them... the pic for a 560-15 is the same as the pic of a 640-15, a pic of a tire with a 5" whitewall is the same as the one shown for a 4" whitewall, so really, its worthless for trying to match up a tire from photos. The specs listed help some, but its still tough to just "pick one" that will look the best based on some overall specs. Thats why i'd love to find someone with a car that already has the ideal combo on it and verify exactly what that combo is... I've found several cars I'd consider "perfect", but have no contact info for the owners. I can't wait to get out to some real rod runs where i can actually look at cars close up, meet owners, and do something without basing the whole thing from internet photos and guessing... Its funny, but thats how I've done every single change I've made to my car so far... I just realized I spent almost 3 grand installing a top on my roadster and never actually ever saw one in real life, just a bunch of photos on the internet... I've got lucky so far, but before i shell out more cake for new tires and/or wheels, I think I better look at some real cars.
joey your best bet is to hold tight for york show and you will see plenty of cars to see what you want for tire size , basiclly they made the purchase now you can sort them out ...
I think you're probably right...that way i can at least enjoy one trip on radials anyhow... :3dSMILE:
If you dont want to wait until York Coker is at Spring Carlisle and they have tons of tires with them.
It is about 5 weeks away
Its not a matter of getting the tires... it's a matter of knowing what sizes i want... i need to see some cars with the look I want, and figure out what sizes they're running. I'll be in Carlisle just the same though... haven't missed a Spring or Fall Carlisle since i was 10 years old.