No more waiting around, time to cut up some metal!!

IMG_5291.jpg
Here's the A pillar showing the innerskin that need to be replaced and a bracket fabricated.The top of the door frame is only tacked to the wood at this point.
IMG_5288.jpg
Here's the filler skin with the bracket welded to it, careful lining up and measuring makes sure it goes in the right place.

IMG_5295.jpg
Welded in and dressed back, starting to look finished. Hopefully this should look something like original.

IMG_5304.jpg
Taa Daa! just about in the right place for the correct leverage position of the slider brackets to work for closing the windsheild against the seal.

No-one's yet told me whether there are 2 slide washers either side so i must assume there are, thats the way it all goes together and works well. Job done . Need to do the same to the other side on my next day off.