32 chassis measurements

Now that my 32 roadster's been on the road for 6 years I'm building the 32 5-window I've been wanting to do! I've bought a set of those new stamped rails from Hot Rods and Horsepower, after a lot of asking around - seems they're THE ones to use now. A friend is building the chassis and he's one good fabricator, but I was wondering about the measurements for where the cross members, trans mount/"K" member etc go. I know Wescott's catalog has all the frame hole measurements but what about the rest? Any suggestions and tips would be appreciated! As I mentioned before, I used a TCI chassis on my roadster so it was all done.:confused:

The Wescott catalog has all the measurements.

Thanks Bob! From what I've seen of your posts/answers and from several others, this is a great site to be part of! LOTS of good tips and info!;)

If you need a Print for a 32 frame here's one:
http://cgi.ebay.com/ebaymotors/ws/eB...category=10076

I bought one myself.