Engine rebuild advice.....Need Help!!!

Quote:

---

Originally posted by Henry Rifle
Streets, That's true, but it DOES increase the velocity, which what I thought you meant when you said "faster."

Given a constant flow rate, decreasing the area will increase the velocity.

If we're talking about volume (cubic feet per minute), then we are in total agreement.

---

WOW!!! I didn't realize things would get this heated while I was gone. I'm in total agreement with Henry on velocity :D and I also feel Tech has the right idea on how to build a stump puller!!!!
But thats just my 2 cents.
And oh by the way, Streets you need to CHILL OUT, don't get so worked up:whacked:

damn is hould of been ont his thread along time ago lmfao the drama in ehres is hillarious:LOL: **) .................scooter

Bill,
I don't know how the rootin is in Arizona- but up here you'll get run over with that combo.
Get you a good set of heads for flow, say a set of 441's, that can be hogged out for directional flow, use that 268 cam you got, flat tops, say 10 1/2 to 1.
You didn't say what style Blazer you have- S-10 style, or the K-5. but either one has the rears to pull off the higher h.p. so the lower end is gonna be there anyway........unless you just WANT to build a slug, then you use the two barrel heads with the stock cam, and just flood the hell out of it, someone will pull you out.