Thread: 350 rebuild questions
Results 1 to 15 of 19
Threaded View
-
10-05-2004 01:14 PM #2
350 4bolt .03 over edelbrock performer manifold
edelbrock performer carb mild crane cam
hypernuteck pistons malory ignition with 8mm
plug wires then i spent 190 bucks to have the
engine balanced that in my opinion was 190 bucks
well spent,this engine runs smoother than the 327
i blew up. the builder said it would put out 240 honest
hp on 91 octane pump gas. this is in my 57 which is
a fairly heavy car,last weekend i stepped on it for
the first time since break in the rear wheel brock loose
off the line and also brock loose in second i did'nt slam
it in 3rd but i don't think it would break loose in 3rd
total cost was 2600 for the long block,i already had
the carb manifold ignition and ram horn exhuast man.
plus the 71 350 4bolt was in a shed since 81 with less
than 100.000 miles on it. and my brother gave me that.
it was out of a truck.





LinkBack URL
About LinkBacks
Reply With Quote
It would be nice if this up and down crap would cease.
Back online