Threaded View
-
09-01-2004 12:12 AM #1
Need help deciding what to put in my SBC350
Here is what I am looking at putting in it, what should I change or do differently?
8 Silvolite flattop 4-valve relief pressed pin hypereutectic pistons .040,
Hastings piston rings to match pistons
Clevite 77 rod bearings .020
Clevite 77 main bearing set. .020
Dura-Bond cam bearings
Brass freeze-plug set
Melling High-Volume oil pump with new drive and oil pump pickup
Cloyes double-roller Speed Set timing chain with steel gears and multiple keyway system (to allow cam timing adjustment relative to crankshaft)
SET OF 1010 GUIDE PLATE COMPATIBLE BLACK OXIDED PUSHRODS 5/16"
Full Fel-Pro gasket set
PBM Performance Parts camshaft kit not sure which cam to go with
Also need to know what crank I should put in this.
This is for a temp engine in the Plymouth until I can get a 318 or 360 for it.1949 Plymouth Club Coupe Still in pieces.
1979 International Scout Travler with SOA, 345 Engine and 727 AT
I believe this was somewhere around 2015, Rick, Rosie and Johnboy
John Norton aka johnboy