Hey guys, I need some help. I have a 1980 RS Camaro with a 305cid engine. I rebuilt the bottom end last year, new pistons/ rings, bearings, the works, but I did not rebuild the heads (no money). SO I drove it all year, I have about 1000 miles on the engine and the thing started smoking really bed, and I knew the valves were really bad so I picked up a set of rebuilt heads from a shop I have used before with out any problems. So this wek end I put the engine back together.
So here is my delema, after putting is all back to gether and getting it running I took it out for a ride and at high RPMs it is still smoking, at idle it will not smoke or evey light, is seams like it comes in spirts at idle. When you rev it up it blow smoke bad. It looks like it is a whiteish blue smoke. I thought may be the intake gasket moved or wasn't sealed, so I pulled the intake off and replaced it, but it is still doing it. And it is comming from both sides, I have a true dual exhaust so I can tell it is comming from both banks.
So here I am and I am at a loss, I am going do a compression check in a while when it cools down a little. But other than that what else is there I can do, I am very frustraterd and at a loss.