Thread: Need help.
-
09-16-2020 12:53 AM #1
Need help.
First post here so take it easy on me. I have a 1980 C3 Corvette with a 79’ 350 4 bolt main that has domed pistons (dont know the exact dome measurements) and has been bored with a compression of 9.5:1 with 487 heads on it and an L82 cam. Im going with an edelbrock Performer RPM air gap intake with a holley 670 double pumper. Im looking for a good head spec (intake, combustion, exhaust size) to wake this motor up and possibly boost the compression a little while still being able to use pump gas (93). Ive heard the dart platinum pro 1 (IRV 180cc) (2.02 intake) (1.60 exhaust) With a straight plug (i have header side pipes) may be a good choice. Im aware some heads have 1/2” higher exhaust ports and with the way my side pipes are mounted i want to steer clear of that. . I want to make sure i get exactly what i need that will work with my motor to add some power that wont be overly expensive. Any advice for any parts i should use on the head will be appreciated. Thanks so much!2348E0F5-C774-43F2-94E3-87CD81EC40CD.jpgLast edited by RaysC3; 09-16-2020 at 08:36 AM.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
Well I've sure gotten old too so don't worry about it! I've had two bypass surgeries, new knees, fought prostate, cancer and diabetes. I'm half blind, can't hear anything quieter than a jet engine,...
the Official CHR joke page duel