Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree27Likes

Thread: ebay hydraulic roller lifters
          
   
   

Reply To Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 18
  1. #1
    figure8's Avatar
    figure8 is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2006
    Location
    Indianola
    Posts
    44

    ebay hydraulic roller lifters

     



    I'm about to freshen up the 350 in a street rod and the $120.00 lifters on ebay make a hydraulic roller cam affordable. Anyone tried them and what was the result? Early block so I need retro-fit lifters. Low $ build with cast pistons, vortec heads and I will use a mild cam.

  2. #2
    techinspector1's Avatar
    techinspector1 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2003
    Location
    Zephyrhills, Florida, USA
    Car Year, Make, Model: '32 Henway
    Posts
    12,423

    You might get away with it, but common sense tells you that they were cast and machined offshore, where manufacturers don't particularly care how the part works out for you. I'd prefer my parts from a famous American company, where I pay a reasonable price for a reasonable product that has a better chance of living through the strain of actuating the valvetrain. My advice will always be to put off the purchase until you can save up enough to buy quality name-brand parts.

    There is an old saying that rings true time after time.........."The sour taste of poor quality is remembered long after the sweet taste of low price is forgotten. "
    .
    Last edited by techinspector1; 10-23-2019 at 08:32 PM.
    NTFDAY, TOW'D, glennsexton and 4 others like this.
    PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.

  3. #3
    glennsexton's Avatar
    glennsexton is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Mar 2005
    Location
    Tigard
    Car Year, Make, Model: 63 Nova SS
    Posts
    2,582

    Welcome to CHR!

    I agree 100% with Tech -

    I have used Howard 91164N on 305, 350, and 400 builds and know they work. I just checked and they run about $400 but they will perform perfectly out of the box with no futzing necessary.

    Remember too that you will need shorter push rods with these (7.200" - 7.300" versus the stock 7.800") - you need to measure using an adjustable push rod (Howard's 92129) on a couple to determine the length you should use. Push rods from any top tier (Comp, Lunati, Crower, Howard's) are fine but again, stay away from the off shore $29 a set as they lack the quality control that is (in my opinion) critical in the valve train.

    Expensive roller rockers are not necessary. They look pretty but then get covered up and unless you're building a drag racer, they add very little to the performance. I typically use the stock style and they work fine for street builds. Make sure the balls are in good shape and start with a 1/2 turn pre-load from zero lash and finish with 3/4 turn.

    What heads are you planning on using?

    Let us know what you're building.

    Regards,

    Glenn
    NTFDAY, rspears and 40FordDeluxe like this.
    "Where the people fear the government you have tyranny. Where the government fears the people you have liberty." John Basil Barnhil

  4. #4
    Hotrod46's Avatar
    Hotrod46 is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2007
    Location
    Vidalia
    Car Year, Make, Model: 1946 Ford Coupe, 1962 Austin Healey 3000
    Posts
    1,499

    +1 on Howard's retro-fit roller stuff.

    I used their cam and lifters (very mild specs) in a low mileage SBC crate motor just to get rid of the flat tappets. They had the cheapest "name brand" parts and they have worked great for 5 years.

    Howard's retro fit cams can use the stock distributor gear also. Other brands can too, but you need to ask before you buy. Some require bronze or other types of distributor gear to prevent cam failure.

    Keep in mind that you will also need some way to control cam end play when switching to a roller since there is no rearward thrust from the lifters to keep the cam from walking forward. This can be as cheap as a simple cam button or as expensive as a new timing cover with a roller bearing. End play needs to be set, too. You can't just drop in a button and call it good. If you just run a simple button, you probably should upgrade to heavy duty timing cover to prevent flexing.

    Considering the global trade mentality that prevails now, there are a lot of name brand parts that come from China or India (or worse), but most of the big companies hold them to a higher standard of quality control. That makes a huge difference.

    Those EBAY lifters are could very well be rejects from a run for an American company that they are trying to dump for a little profit. In the case of lifters, all it takes is one lifter to fail out of sixteen to leave you with a pile of junk. Not worth the risk, IMO.
    Mike

    I seldom do anything within the scope of logical reason and calculated cost/benefit, etc-
    I'm following my pass​ion

  5. #5
    falconvan's Avatar
    falconvan is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    festus
    Car Year, Make, Model: 48 Plymouth, 48,54 Heap
    Posts
    3,407

    I just took my old GM ones apart, soaked them in solvent, and reassembled them. worked great; they were sludgy but really didn't have any wear on them.
    cffisher likes this.
    1 Corinthians 1:27

  6. #6
    cffisher's Avatar
    cffisher is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    Constantine
    Car Year, Make, Model: 57 chevy 2 dr wagon
    Posts
    9,476

    Quote Originally Posted by falconvan View Post
    I just took my old GM ones apart, soaked them in solvent, and reassembled them. worked great; they were sludgy but really didn't have any wear on them.
    as long as they go back in the same bores
    NTFDAY and falconvan like this.
    Charlie
    Lovin' what I do and doing what I love
    Some guys can fix broken NO ONE can fix STUPID
    W8AMR
    http://fishertrains94.webs.com/
    Christian in training

  7. #7
    glennsexton's Avatar
    glennsexton is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Mar 2005
    Location
    Tigard
    Car Year, Make, Model: 63 Nova SS
    Posts
    2,582

    This is a retrofit - new roller cam and lifters so the old ones are not so important in this discussion. On that note, I have reused lifters in the distant past (when we had different oil) and had them work fine - even on a new cam. On a build today on a non-roller block, it has to be roller and new everything.
    "Where the people fear the government you have tyranny. Where the government fears the people you have liberty." John Basil Barnhil

  8. #8
    figure8's Avatar
    figure8 is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2006
    Location
    Indianola
    Posts
    44

    Thanks for the input. I better pass on the cheap lifters. I will get a hydraulic flat tappet kit from Elgin, Howards or Summit. Sure it will work fine.

  9. #9
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    11,124

    Quote Originally Posted by figure8 View Post
    Thanks for the input. I better pass on the cheap lifters. I will get a hydraulic flat tappet kit from Elgin, Howards or Summit. Sure it will work fine.
    IMO you're throwing your money away buying any flat tappet cam considering the lubrication qualities of the oils available today. Do yourself a favor and invest in a roller cam to better ensure that it will last.
    glennsexton likes this.
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  10. #10
    NTFDAY's Avatar
    NTFDAY is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Springfield
    Car Year, Make, Model: '66 Mustang, 76 Corvette
    Posts
    5,370

    Quote Originally Posted by figure8 View Post
    Thanks for the input. I better pass on the cheap lifters. I will get a hydraulic flat tappet kit from Elgin, Howards or Summit. Sure it will work fine.

    Or Isky. The trick is to break the cam in with used and practically worn out springs. I have a Howards in the garage I plan to put in the 350 in a 76 Corvette. If it was running a 4 speed i would not hesitate to put in a 30-30 Isky that was ground in 64 and has been in 3 different engines. It's a solid lifter cam and I think it's too stout for an automatic.
    Ken Thomas
    NoT FaDe AwaY and the music didn't die
    The simplest road is usually the last one sought
    Wild Willie & AA/FA's The greatest show in drag racing

  11. #11
    Driver50x's Avatar
    Driver50x is offline CHR Member Visit my Photo Gallery
    Join Date
    Jul 2016
    Location
    Saint Petersburg, Florida
    Posts
    437

    If you decide to roll the dice with the flat tappet stuff, I would recommend that you do some research and use the right oil during that cam break in. Using the cheap oil off the parts store shelf could definitely get you in trouble these days.
    Steve

  12. #12
    figure8's Avatar
    figure8 is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2006
    Location
    Indianola
    Posts
    44

    Quote Originally Posted by NTFDAY View Post
    Or Isky. The trick is to break the cam in with used and practically worn out springs. I have a Howards in the garage I plan to put in the 350 in a 76 Corvette. If it was running a 4 speed i would not hesitate to put in a 30-30 Isky that was ground in 64 and has been in 3 different engines. It's a solid lifter cam and I think it's too stout for an automatic.
    I hear you . I have a 30+ year old Crower Monarch .470 lift, 230 duration @.050, 110 LS that I would use in a heartbeat if I didn't have an automatic and turnpike cruiser gear

  13. #13
    figure8's Avatar
    figure8 is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2006
    Location
    Indianola
    Posts
    44

    Quote Originally Posted by Driver50x View Post
    If you decide to roll the dice with the flat tappet stuff, I would recommend that you do some research and use the right oil during that cam break in. Using the cheap oil off the parts store shelf could definitely get you in trouble these days.
    yes I will use oil with zinc

  14. #14
    34_40's Avatar
    34_40 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    New Bedford
    Car Year, Make, Model: 34 Ford 3W Coupe Replica
    Posts
    14,681

    Well, you've replied to a post that was last active some 3 years ago.. Don't know what they did in the end.. but I hope and pray they didn't go with anything from that evil empire known as ebay!
    NTFDAY likes this.

  15. #15
    NTFDAY's Avatar
    NTFDAY is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    Springfield
    Car Year, Make, Model: '66 Mustang, 76 Corvette
    Posts
    5,370

    Quote Originally Posted by 34_40 View Post
    Well, you've replied to a post that was last active some 3 years ago.. Don't know what they did in the end.. but I hope and pray they didn't go with anything from that evil empire known as ebay!

    Looks to be a spam artist directing traffic to some german website
    Ken Thomas
    NoT FaDe AwaY and the music didn't die
    The simplest road is usually the last one sought
    Wild Willie & AA/FA's The greatest show in drag racing

Reply To Thread
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink