1LikesThread: 86 burban needs more balls...
Results 1 to 4 of 4
LinkBack URL
About LinkBacksThreaded View
-
09-07-2017 06:27 AM #2
CHR Member
- Join Date
- Feb 2007
- Location
- Vidalia
- Car Year, Make, Model: 1946 Ford Coupe, 1962 Austin Healey 3000
- Posts
- 1,508
You need torque. Best way to get that is either a 383 stroker built from your current 350, 400 small block or a big block (454 or bigger). No replacement for displacement, except maybe a small blower.
Either small block would be easier since that is what is in the truck now.
The 454 would be a bolt in swap with factory parts, but would be a lot easier if you found another truck like yours that had a big block so that you had all the little parts needed to make the swap happen. Lots of 1 ton trucks had 454's and the same basic frame as yours. I would hunt down one of those if that was the direction I wanted to go.Last edited by Hotrod46; 09-07-2017 at 06:32 AM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
To the top
Where is everybody?