Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree1Likes
  • 1 Post By techinspector1

Thread: Need advise on cam
          
   
   

Results 1 to 6 of 6

Threaded View

  1. 08-20-2017 10:22 AM #1
    Sawlog
    Sawlog is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Aug 2017
    Location
    Central illinois
    Posts
    5

    Need advise on cam

     



    Hello, I'm new on here.
    I am going to rebuild my 350 in my 69 c 10.
    It's a 350 bored .060 over.
    65cc iron heads with 2.02, 1.60 valves 165cc runners
    Also have long tube headers with 2.5in dual exhaust
    10.1 compression
    Edelbrock performer intake
    Edelbrock 600 cam carb
    Th400 tranny with stock converter. Want to stay with stock converter.
    3.08 rear gear, wanting to go to 3.43
    I drive this truck alot, 60 miles a day when I take it to work.
    I'm wanting as much power as I can get with this build.
    This is what I'm going to work with, just need cam advise please. Flat tappet.
    Thank you
    Last edited by Sawlog; 08-20-2017 at 03:36 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink