1LikesThread: Timing mark question
Results 1 to 4 of 4
LinkBack URL
About LinkBacks-
11-05-2016 02:06 PM #1
CHR Member
- Join Date
- Mar 2016
- Location
- Kent
- Car Year, Make, Model: '54 Kaiser, '63 Avanti, '59 Rambler
- Posts
- 44
My Social Networking
Timing mark question
Guys - I'm breaking in my fresh 350 and prefer to adjust the distributor position when I'm not trying to hold the RPMs up simultaneously.
If the mark is seen south of where I want it, by the timing light, in which direction will I tweak the distributor to bring it up a little?
Thanks!
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-05-2016 03:55 PM #2
CHR Member
- Join Date
- Mar 2016
- Location
- Kent
- Car Year, Make, Model: '54 Kaiser, '63 Avanti, '59 Rambler
- Posts
- 44
My Social Networking
I'm in the driver side fender and yes, using a vacuum advance off the Edelbrock.
-
11-05-2016 04:16 PM #3
CHR Member
- Join Date
- Jun 2007
- Location
- New Market
- Posts
- 2,584
are you asking which way to pull the dizzy to advance the timing ?iv`e used up all my sick days at work .. can i call in dead ?
-
11-05-2016 06:15 PM #4
CHR Member
- Join Date
- Mar 2016
- Location
- Kent
- Car Year, Make, Model: '54 Kaiser, '63 Avanti, '59 Rambler
- Posts
- 44
My Social Networking
That's very helpful. Many thanks!
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project