What type do you guys recommend for the initial install? Also, would you recommend I I also apply this lube to lifters? Thanks,
Printable View
What type do you guys recommend for the initial install? Also, would you recommend I I also apply this lube to lifters? Thanks,
Flat tappet cam, read this.....
http://www.crankshaftcoalition.com/w...ricks#Cleaning
Roller tappet cam, wash off the protective oil that is applied at the factory to prevent rusting, dip the cam and the lifters in engine oil, install and run.
.
I use Joe Gibbs Driven "Assembly Grease" on the cam and lifters.
Engine Builder Products - Assembly Grease - Driven Racing Oil Sales
I also use Joe Gibbs Driven Break-In oil "BR" or "BR30", followed with "HR1" or "HR2" after break-in. Whatever oil you use, it needs to be a high zinc oil for flat tappet cams. I do not like the ZDDP additives you put in the regular oil, and do not recommend them to my customers.