Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree11Likes
  • 4 Post By techinspector1
  • 1 Post By glennsexton
  • 1 Post By 36 sedan
  • 2 Post By techinspector1
  • 1 Post By backyardbuilder
  • 2 Post By rspears

Thread: Intake Manifold Fitment Issue
          
   
   

Results 1 to 15 of 15

Threaded View

  1. 03-04-2016 11:38 AM #1
    backyardbuilder's Avatar
    backyardbuilder
    backyardbuilder is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Feb 2010
    Location
    west chazy
    Posts
    25

    Intake Manifold Fitment Issue

     



    Ok so i just put my heads on the other day and i set a (new edel rpm) intake manifold on and i noticed with the gaskets i had the ends of intake are bottoming out on the valley end walls. The block was decked from 9.025 to 9.010 also im running a .015 compressed head gasket. Ans the heads were surfaced but i bought used so unsure if they were ever cut. Would i be able to just have some of the intake bottom cut off and run a .125 intake gaskets. The bolt holes all align.
    Attached Images
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink