Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree20Likes

Thread: 350 rebuild piston issue
          
   
   

Results 1 to 15 of 32

Threaded View

  1. 09-28-2015 12:16 PM #12
    jerry clayton's Avatar
    jerry clayton
    jerry clayton is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    Post the exact part number of the ring set your using -and I mean to include the last 3 numbers----------

    and take off the top ring to install a test fit on the other rings, then reverse to just the top ring to verify that its a top ring problem---------

    can you see the end gap of the top ring when its in the hole? should be aprox .020 gap visable


    sorry robot------probly typing at same time
    Last edited by jerry clayton; 09-28-2015 at 12:54 PM.
    glennsexton likes this.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink