OK, so I took of the fuel pump and the upper bolt (the one you guys are talking about) and sprayed some lube in the hole, just to make sure it was the same oil galley and yep it ran out the fuel pump mounting hole. The bolt seemed short enough and I didnt see any damage to it but.... the fuel pump push rod seems to be stuck. Tapped it a few times wouldnt budge so I took some vise grips and tried to turn it and pull it out, wont budge. Should I crank the engine a couple of times and see if that pushes it out? Kinda hard to see how the push rod could get bent?