Results 1 to 2 of 2
LinkBack URL
About LinkBacksHybrid View
-
08-20-2014 05:03 PM #1
CHR Junior sMember
- Join Date
- Aug 2014
- Location
- Brick
- Posts
- 1
Need Help Identifing Small Block Cylinder Heads
Hello, I have a set of High Performance Cylinder Heads off an older Chevy 350 engine. On the side of the heads near the bottom says Bill Mitchell and there is a stamping that has the numbers 378. On the heads their is the numbers 11 21 between the springs. They are angle plug heads. Any other info would be great.[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
-
08-20-2014 08:14 PM #2
CHR Member/Contributor
- Join Date
- Mar 2005
- Location
- Tigard
- Car Year, Make, Model: 63 Nova SS
- Posts
- 2,591
Welcome to CHR!
Bill Mitchell Products - they look to me like World Products Sportsman II cast iron heads (big valves). If they have no cracks, these should be decent head for mild to mid-level build. Probably worth 50 horse over stock."Where the people fear the government you have tyranny. Where the government fears the people you have liberty." John Basil Barnhil
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I saw last night on fb about John. The world sure lost a great one. I'm going to miss his humor, advice, and perspective from another portion of the world. Rest in Peace Johnboy.
John Norton aka johnboy