Thread: 400 small block !!!!! having some head issues and need some advice

Tweet

Originally Posted by jerry clayton

that's the reason I got a CK10-------


the decking process is where it is especially benefitial to do common engines ----with BHJ plate and main supports it can take more time to change setup than it does to cut the decks

yes well i keep going with my hone works just fine if i was boring 4 blocks a week i would spring for the11000. 14000. for a used ck10 . as for bhj deck tru had it for many years now. i make my set up rings but the bbc 2.937 ring works on the 351c .bore and FE blocks the 460 work on the 351w have the BHJ bore tru.there piston vice. there stuff deck plates iron and aluminum and some . i still deck blocks on the Storm vulcan with speed contol and run CBN with the Berco