Does anyone have torque specs for sbc 350 on the following:
Heads:
Rods:
Mains:
Printable View
Does anyone have torque specs for sbc 350 on the following:
Heads:
Rods:
Mains:
heads 65 ft lbs
rods45 ft lbs
mains 70 ft lbs
corvettes are 80 on the mains.
You really should get a book for the year and engine.
Google is (sometimes) a wonderful thing. Also, you should do what Charlie said.
SBC assembly spec
rods only 45 with stock Gm bolts with oil. if rods were rebuilt with using a 8740 .ARP then its 50 with arp moly past only . if you use teflon dope on stock head bolts run then up to 65 only. if no teflon sealer then i run them up to 70 with forma-a-gasket on threads bolt hole are not blind on stock chevy 350. so some sealer must be use on head bolts allways oil under shoulder of bolt. i run the cam bolt s to 25. i used grade 8 bolts with thread red locker