Quote Originally Posted by ted dehaan View Post
Check for a miss match of the intake manifold check to be sure the intake and head angles are parallel and the manifold is not bottoming out on the front and rear of the block do you have freezing conditions where you live in az. it could be roger is right but I think it must be a awfully big crack to fill the pan that fast maybe it is ,,,,,ted
Looks like Buckeye's a suburb of Phoenix, so a frozen block is not going to be the problem unless it "sat" somewhere else or got busted some other way? Ted's right, if it's not a busted block then the intake to block interface is about the only place that could put that much water into the pan quickly. Sorry for the bad info...