7Likes
Thread: Is there any harm in leaving this in place??
Results 1 to 11 of 11
LinkBack URL
About LinkBacksThreaded View
-
04-26-2014 07:26 PM #1
CHR Member
- Join Date
- Apr 2013
- Location
- EUGENE
- Car Year, Make, Model: 30model a hiboy coupe
- Posts
- 15
Is there any harm in leaving this in place??
I installed a crankshaft rotation adaptor (one of those 3 bolt plates with the 1/2" ratchet drive in the center..see pix.) I didnt want to rely on turning the center bolt to rotate the engine. Had issue finding TDC with a new motor/new dampener/pointer, which has been resolved (I HOPE). The engine is in the car and not a lot of room to work between the pulley and the radiator, and its a major pain in the waazoo to put this thing on and take it off and thought it might be handy to have it in place from now on, but......
My question is this: Once the center bolt holding the harmonic dampener is torqued to specs, is there any problem with leaving this adaptor bolted in place on the harmonic dampener?
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Building a 1937 Caddy with a LS 2 engine. Looking at the exhaust system and wondering if I really need to put an X or H pipe in the system or can I just go straight dual exhaust. Will performance be...
Exhsust system