PlastiguaGE IS THE POOREST CHOICE OF ACCURRATE MEASUREMENT

telescopic gauges are probably the second worst

However-since you have different measurements on all the journals except 5 &6, I would say your rods are probably not equal---------

As far as the hv pump on a four quart pan-no-------you will pump it dry before the oil has a chance to return to it--if you want a hv pump run at least a 8 qt pan

as for the clearances you have they are within an acceptable range except your #3main(You didn't mean #5 cap did you? if so that one is ok also ) You can take the main cap and on a precision flat surface face off the mounting surface til you get a more acceptable clearance or------------take the block to a shop for align honing and recondition/ resize the rods-

And as a note for everyone about high volume pumps----many of the fastest BBC racers of years gone by used to run a small block pump as it was smaller and took less HP to turn-----------