2Likes
Results 1 to 15 of 27
LinkBack URL
About LinkBacksThreaded View
-
03-08-2013 09:16 AM #1
CHR Member
- Join Date
- Jun 2012
- Location
- St-Petersburg
- Car Year, Make, Model: Chevy Beauville 1979
- Posts
- 33
Crankshaft .060 undersize - is it good idea?
I have .060 oversize rod and main bearings, and rusty crankshaft (2pc rear main seal).
Is it good idea to do that oversize or should I try to find new crankshaft in better shape? I'm going to put it in stock 350 engine for street using. The trouble is that I'm away from Unated States - from Russia, and I must wait a long time if I will order nominal crankshaft and bearings froms Summit, for example.
The second trouble is - here I can't do dynamic balance (it's possible, but it's VERY expencive - device for V8 engines is very rare).
May be the best way is order new nominal crankshaft - I think, it's balanced after production?
If no, give me a link for example, where I may find crankshaft ready to assembly "out of the box".
*excuise my poor English
Last edited by wbud; 03-09-2013 at 04:51 AM. Reason: wrong title
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
John's ride to the cemetery, his beloved Billings OK bus, The Baby Elephant!! Traveling in style!! As his service was starting I couldn't figure out what the music was, heavy on a flute in a jaunty...
John Norton aka johnboy