Thread: engine mounts not lining up
-
03-16-2013 05:45 PM #1
engine mounts not lining up
I have a 84 trans am I am turning into a hot rod
I have a 350 engine out of a 80 chevy truck that I am trying to put in the TA. I am using the original motor mounts from the 305 out of the TA. (part numbers 334971 & 039436)The problem is the mounts on the engine will not line up with the crossmember mounts. I get one through bolt in and the other bolt hole does not line up its the width of the hole off.
Any one have any ideas? I have swaped mounts from side to side (no change) double checked mounts on the frame (they only go on one way)
I am at a lost so any help would be great.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
Well I've sure gotten old too so don't worry about it! I've had two bypass surgeries, new knees, fought prostate, cancer and diabetes. I'm half blind, can't hear anything quieter than a jet engine,...
the Official CHR joke page duel