Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: what engine do I have?
          
   
   

Reply To Thread
Results 1 to 3 of 3
  1. #1
    lbroknwing is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2005
    Location
    castle hayne
    Car Year, Make, Model: 31 ford
    Posts
    14

    what engine do I have?

     



    Hi gang, I bought a chevy powered T bucket. The previous owner does not know anything about the engine and neither to I! It has the old three bolt starter bell housing and the title states the car was built in 1972. The engine block serial # is F1001D. Can anyone help me with this? THANKS!

  2. #2
    pepi's Avatar
    pepi is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Dec 2006
    Location
    Woodstock
    Car Year, Make, Model: 34,stroker,32pu,2020 MustangGTpp2
    Posts
    1,109

    From the front of the motor, look right and down the side of the distributor, on the back lip of the block. There will be a number that looks like this 3703524 record and check out one of these links that will get you started.
    SBC casting numbers - Dogpile Web Search

    The heads the second piece of the puzzel, for me the best way to find out what's going on there is to remove the valve cover and look at the casting number record that and look in these links

    sbc head casting numbers - Dogpile Web Search

    picture of head casting number DSCN1325.jpg
    Last edited by pepi; 02-16-2013 at 05:48 AM.
    I have two brains, one is lost and the other is out looking for it

  3. #3
    39Deluxe's Avatar
    39Deluxe is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2004
    Location
    Edgerton
    Car Year, Make, Model: 59 Corvette 283/270 69 C10 Stepside 355
    Posts
    162

    The stamped number tells us it was a Flint built engine assembled on Oct 1st. and the D says it was a 283 2bbl with a Powerglide used in 58-59-60 Chevrolet passenger cars. Of course the heads could have been swapped in the past. You will need to follow the instructions above to get the casting numbers and dates off of them.

    Tom

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink