OK, here is a tough one only someone who either knows a boat load about this or someone who has used a setup like this before.
I'm installing a 63' small journal 327 into my 46' International Harvester I am hot rodding. I love the oil spout on the older small blocks so I choose to not run a modern intake on this motor. The motor was out of a 63' Vette and has the finned Corvette valve covers that someone before me polished out. The intake was an offy but I replaced it with a 69' Camaro Z28 intake off a DZ302. I read a lot of great things about this intake and it has the oil spout I like. ; )
So here is my question. I only have an alternator and power steering pump to drive with the motor. I don't want to have either up top above the intake and heads as it will ugly up the top of the motor. I fabbed in a Jaguar front suspension and have plenty of room down low but the area is pretty narrow down there. I would rather keep both the alternator and PS pump at the mid level of the motor. Anyone know of a drive system like this?