Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: change carburetor?
          
   
   

Reply To Thread
Results 1 to 9 of 9
  1. #1
    Simi Mike's Avatar
    Simi Mike is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2011
    Location
    simi valley
    Car Year, Make, Model: 32 deuce
    Posts
    67

    Smile change carburetor?

     



    Hello group -
    I have a 350 chev motor in my 32 deuce coupe. It has a Summit 750cfm double pumper carb, with only 1000 on the motor and carb.
    When I start it from cold, it cranks over quickly, but have to keep pumping the pedal for a minute, to get the rpm up. After its warmed up, it seems to run fine. Should I be looking for a smaller carb, like a Edelbrock 600cfm, instead of this 750 double pumper?
    The carb was on the car when I bought it. Any info would be appreciated.
    thanks

  2. #2
    bel_mor's Avatar
    bel_mor is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2011
    Location
    Newport
    Car Year, Make, Model: 1986 monte corlo ss
    Posts
    33

    I have an 870 race carb on my big block chevy no choke and same story.. I think its the nature of a holly( or in your case a holly knock off) could be a choke adjustment im not a carb guy but thats where i would start..

  3. #3
    bel_mor's Avatar
    bel_mor is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2011
    Location
    Newport
    Car Year, Make, Model: 1986 monte corlo ss
    Posts
    33

    oh and you could take a look at the way its timed too

  4. #4
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    11,047

    Sounds to me like a choke plate adjustment may be needed. See if you can find the rebuild instructions for that carb on-line, and look at the setup instructions.
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  5. #5
    Itoldyouso's Avatar
    Itoldyouso is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    fort myers
    Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
    Posts
    11,033

    Some cars are just cold natured, and it is hard to know why sometimes. My Son Don is running pretty much the same setup in his 23 that I am in my 27 (sbf, 2 x 4 Edelbrock 600's) and yet his is a little slower to warm up and take gas than mine. I think he even has his choke wired in and mine are both wired wide open. Very confusing.

    Don

    Grrrrrr, the forum is still adding words to your text.

  6. #6
    RadRidesByDan's Avatar
    RadRidesByDan is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2011
    Location
    Calgary
    Posts
    175

    In my professional opinion its a choke issue.... second problem can be an over kill carb for a SBC. Unless the motor has been bored out to the max and its loaded with racing parts to have a motor that puts out 600+hp and made to run over 5000rpm..... the 750 is an overkill ...it will baxically flood its self out on cold starts and give you crappy gas mileage...... the most you need for street power is no more than a 600cfm.

    My 2 cents
    Never take life too serious.....You wont make it out alive

  7. #7
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    Its all in the idle and transfer circuits----even an 1150 can be made to start and idle

  8. #8
    Simi Mike's Avatar
    Simi Mike is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2011
    Location
    simi valley
    Car Year, Make, Model: 32 deuce
    Posts
    67

    Thanks for the replies. I found the Edelbrock 1406 performer series carb in the Summit catalog for $299. I'm going to swap out the carbs and see how that goes. Yes, the engine floods out easy, and is hard to start 10 minutes after shutting it off. Thanks all - for the advice !

  9. #9
    Bruce lee is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Feb 2009
    Location
    McKinleyville
    Car Year, Make, Model: 27 Ford Roadster
    Posts
    198

    I have a friend that bought a summit knock off, The carb did things carbs can't do. We tore it down and there was aluminum shavings everywhere. Cleaned it up and it started behaving like a real carb>

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink