Thread: Decking questions for Pat

Tweet

intake runner in head still may have a weak spot .i line head bolt holes all the time they may have miss one but hard to get oil in that way have to come down from head bolt . push rod holes in the head s are weak they will suck oil. if intake is sealed down it can be rings or heads less your intake has a hole in it .that intake has the bolt holes for middel bolts and center bolts in the intake is that open to plenum? you have them bolts in the intake other then cutting threw the heads if big valve springs were put in that will make it smoke. oil ring spacers rails ? was the piston pins in the oil ring land if so did you put oil rail spacers in if so did you put them in right