So as time and ideas go by,plans for builds on engines evolve.

The question of pins still left open.

We have gotten this to a torque curve of over 500lbs at 3500rpm.

That is something I want to keep.

Reminder of parts purchased and machine work done:

Icon reverse dome pistons which are a -18 and set up for 5.7 rods

Howards Track smart forged crank

Block machined and honed for the above with deck height 10 down.

The HP rating is at 4400 for 350 hp.

Here is what I want to revise.A 400ish HP rating at 5000 rpm.

Please lets look at that to see what we need to get there.

Thanks,

Gary