Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: valve weight
          
   
   

Results 1 to 11 of 11

Threaded View

  1. #9
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    Quote Originally Posted by suprstock View Post
    the valve faces are concave on the old ones ,new are flat about half inch from edge then angled to the center . I am running 220 lbs seat pressure on a TRW solid roller cam 6.00 lift . think it would hurt any thing to use the 3 heavy valves? I guess I could take them to a machine shop and have the faces cut back .
    yep i cut valves on my lathe i hold then in a 5c collet .may be less money to get a set of engine pros ? i know they not that much and they have the full angle cut across there face and not the dip in the center
    Last edited by pat mccarthy; 01-28-2011 at 09:16 PM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink