Suburban 350 Engine Swap

Hey out there,

I've got a '95 Chevy Suburban. I want to pick up a crate engine for it. When I check GM Goodwrench.com and GM Performance Parts.com there is no info as to wether any of the crate engines will work with my current stock sensors, computer, Map sensor - or for that matter if the damn thing will even run. Does anybody know if I can use the 285 hp or 330 hp 350cid crate engine with my current stock setup without changing anything - or if changes need to be made - what to do? I've been hotrodding for years, but with non-computer controlled vehicles.

My current engine is a stock '95 non-vortec 350 with TBI.
Vin # 1GNFK16K1SJ456743

Basic questions:

1. will the engine even run?

2. if it runs, will it shoot error codes to the dashpanel? (check engine lite etc..)

3. will my stock induction - intake,TBI work?

4. is there any computer change required, if so what would work?

5. assuming all is ok would it pass smog in California?

6. Would the simplest thing be to pick up a Vortec Crate Engine, and the matching Sensors, Induction and Computer for a '96?

Thanks,

Mike
michaelpwirtz@sbcglobal.net

1. maby
2. if not done right, yes
3. no
4. yes, probably needs re flashing/ burning
5. no, just keep the original motor, there are too many complications for a vehicle that new.

Just call your local G.M. Dealer parts counter... They'll have the answers to wich engine, all your injection.sensors & ecm will work fine, looks like in 95 they had a 350,454 or Deisel, This should be a straight forward swap,but I suggest you replace the oxygen sensors while ya got it out.....If'n ya use the high output engine you might have trouble with the emission test cuzz of the cam overlap, Call several dealers and get the prices every one of em will be different.