Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: chevy engine in olds "g"body questions
          
   
   

Reply To Thread
Results 1 to 4 of 4
  1. #1
    richyrich's Avatar
    richyrich is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2011
    Location
    Shrewsbury
    Posts
    11

    chevy engine in olds "g"body questions

     



    Hi everyone, I have a couple questions about putting a chevy 350 engine in an 87 cutlass supreme. First would be motor mounts.What motor mounts do I need? Anyone ever try this type of change? I am noticing also that the fuel line going from the tank to the pump are different too. The olds fuel pump has two inlets connected from rubber hoses while the fuel pump that came with the crater 350 only has one threaded inlet. Thanks to anyone who can help me out.

  2. #2
    HOSS429's Avatar
    HOSS429 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2007
    Location
    New Market
    Posts
    2,590

    most likely a little junkyard searching will find you a cutlass with a chevy motor from the factory .. just get those mounts and you probably can get a chevy fuel pump with dual lines .. one would be inlet and the other a return line .. but i have been known to be wrong ..
    iv`e used up all my sick days at work .. can i call in dead ?

  3. #3
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    Or another option would be to run a fuel pressure regulator with a return port, and route the return from the regulator thru the OEM return line.....

    As for the mounts, did one of these years ago and just used the mounts out of a G body Monte, welded the frame mounts to the crossmember and used the stock Monte motor mounts on the engine. Just install the engine with both frame and engine mounts bolted on the engine and trans bolted on the engine, set it in the chassis straight and level with the trans bolted to the crossmember then weld or bolt the frame mounts to the crossmember.
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  4. #4
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    mounts bolt to frame .steel clam shells bolt to engine and are all about the same for 1980 up v8 chevys .your frame is GM G body same as monty malibu el camino of the same year so its a bolt in job holes should be there in frame cross over
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink