Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: this look right?
          
   
   

Results 1 to 15 of 25

Threaded View

  1. 12-23-2010 07:07 PM #8
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    Quote Originally Posted by thejallenator View Post
    ahhh thanks for the clarification!! i thought for a second that the balancer was ripped off damaging the crank!! good to know its not that way. now ive gotta try and find the right cam and this motor will be ready for assembly!
    make sure you have the right cam bearings to. the cam on number 5 will have a flat mill in one spot if soild lifter and a groove 360 round the cam but that only pre 60 ? as long as the block is groove on #5 the cam will not need to be .if not then the lifters and upper end will not get oil the upper end oil thru #5 cam bearing
    Last edited by pat mccarthy; 12-23-2010 at 07:15 PM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink