Printable View
Here's the deal, I had my 327 SJ block prepped and bored 0.040 over. Everything is good on the block. The problem is the crankshaft.
It showed cracks after magnafluxing.
I already bought the 0.040 over pistons and they are fitted on the rods.
Anyone have a good SJ crank for sale? What other options might I have to get around this problem?
You can find them, but you will have to do some searching. This is what I turned up in a Google search. You could also check with some local engine building shops. A lot of them store crankshafts for future use.
http://cgi.ebay.com/ebaymotors/327-C...item56417fd32e
http://www.racingjunk.com/category/0...rankshaft.html
i may have one for you . your not to far away so shipping may not be bad .if i have one its not going to be cheap but it will be ground and set to go. PM me and i will look at the shop and see if i still have one hanging up