Hi Guys/Gals.

I've been working on a 355 engine and don't know anyone with a dynosim 5, apparently they are pretty accurate.

Would someone be able to run my combo and see what comes up?

350 + .030"
Hyper d-cup piston with .018" dish
Edelbrock E-Tec 170 heads (1.94 intake/ 1.55 exh.)
64 cc- should be 9.0:1
Howard Cam -hyd. retro roller
.525 int/.532 exh.- dur@.050 226/234 -LSA 108
1.5 roller rockers
Edel. airgap intake
Holley 650 dbl. pump
1-5/8" headers

Thats about it, going to be for the street, nothing outrageous.
Wanted something with bottom end to play with.

Thanks, if anyone could help me out.