Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Leaky freeze plug
          
   
   

Reply To Thread
Results 1 to 2 of 2

Hybrid View

  1. 07-18-2010 06:15 PM #1
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    i put them in with plug driver and used 620 loctite on them .but i first clean the plug bore with 80 grit by hand to clean the block fron any old sealer or rust wipe clean with thinner then when dry i then put the 620 in the bore with a finger then coat the plug side with 620 and i use a loctite primer on the plugs first before the 620 .you may get away with out the primer on the plugs
    Last edited by pat mccarthy; 07-18-2010 at 06:32 PM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
    Reply With Quote Reply With Quote
Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink