I was wondering if anyone might want to weigh in on an oil pressure issue.
Here's the details:
.030,forged flat tops, dart 215 aluminum pro 1, hyd roller 236/242 .560/.578 108 lsa, king bearings .002 on mains and rod clearances, scat rotating assembly, milodon/high pressure/high volume oil pump, moroso 6 qt pan with baffle and matching pick up.

I measured about 3/8 inch from pickup to bottom of the sump.
When cold, oil pressure idles about 40psi
When warm, it idles about 5-8psi and revs to about 25. No knocks or low end noises and the roller rockers and valve train seem to be getting plenty of oil.
also, I have checked with another mech gauge and it reads the same..
All oil galley plug put in by my reputable machine shop which i have had sucess with in the past.
I was thinking about changing the pump but wanted some inputs or ideas first. Any help is appreciated.