Thread: Cylinder bore wall chipped
Results 1 to 3 of 3
LinkBack URL
About LinkBacksHybrid View
-
03-31-2011 06:03 PM #1
Registered User
- Join Date
- Mar 2011
- Location
- hanover
- Posts
- 2
Cylinder bore wall chipped
I have a 400 small block that was seized. While I was attemping to get the piston out, I chipped the bottom end of the bore wall.
The piston still have enought room to lower in the bore with out exposing the chipped portion. Can I still use the block?
-
03-31-2011 06:36 PM #2
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
yep just roll the sharp edge off the chip .long as the skrit of the pistons is still some what covered by the lowest part of the bore your okIrish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
-
03-31-2011 07:29 PM #3
Registered User
- Join Date
- Mar 2011
- Location
- hanover
- Posts
- 2
okay thanks... jus wanted to make there will be no pressure problems
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I saw last night on fb about John. The world sure lost a great one. I'm going to miss his humor, advice, and perspective from another portion of the world. Rest in Peace Johnboy.
John Norton aka johnboy