AND.....you end up with the pistons down in the hole by 0.045" or so....I have heard that the stack up that Tech describes adds up to
8.980 or 8.960....either way makes for a thick head gasket equivalent (-0.045 deck plus real gasket thickness of 0.020 or so equals 0.065")

Also, the 3.875 bore means you have to run essentially 283 friendly valve sizes....not conductive to performance.

If you have a bunch of parts laying around, need to assembly a junk motor out of them, and dont care if it has any performance, yes, it would be streetable. If you have to buy parts, it is a waste of money.