Thread: bogging under load sounds real bad

Tweet

Right on Nitro -

A good rebuild kit may cure your woes. Soaking in a good solvent designed for removing all the yuckies is a must. Not knowing if you're familiar with the Q-jet entrails, here's a couple sketches. Sorry about the quality, but they're copies. I've highlighted the metering rods that nitro referenced with red clouds - they are in pairs (even though shown as a single in the first sketch).

Probably goes without saying - please wear your safety glasses when using the carb cleaner. It can be real hard on the eyes [don't ask..].

Good luck on this
Glenn