Quote Originally Posted by pat mccarthy View Post
STOP if you feel that your cutting the bore with the lifter you should not have to worry much about this less you wipe the lifters
Today on the Suburban engine: On the last last 8 I did grab them with nedle nose plyer and pull / pry them out once the lifter was 1/2 way up and could grab the center groove. They were stiff but I felt it was just crud sludge build up.

Tomorrows Boat engine shoulb be 700 hrs and Clean Clean Clean if it isn't rusted up inside (cracked head internal water leak / rusted stuck and unstuck 2x).


Now I need to find a good cam bearing change out / install article. Search Search Search....