Thread: .450 lift, stock valve springs?
Threaded View
-
06-14-2009 03:40 PM #1
.450 lift, stock valve springs?
The heads are rebuilt by machine shop with 3 angle valve job. This is a 283 .060 over. Installing 218/218-.450/.450. 106 lsa. I realize it is good practice to change out the valve springs but I would rather not if not necessary with this lift. BTW- hyd/ flat tappet. Thanks guys
Another question, I was told this engine takes 6 quarts of oil. Is that correct? It's a remanufactured 350 with stock pan.
SB distributor won't fit