Thread: step nose cam in old 350
Threaded View
-
05-08-2009 04:57 PM #1
step nose cam in old 350
here some parts i made up to put the step nose cam in a older 350 chevy WHY ? well the cams are EZ to find as take outs and get you in to a roller cam cheap in a older block. i could of went with a new block but this one had just been bored .so he wanted to keep it . i drill the oil lifter galleys sprays added oil on the thust and button to is well as keeps out air lock as well. i allso do the bbc to. here is the drill vise. i run it in my 3/8 drill to drive the small drills . i cut down some bronzes to make a thrust bearing. and cut out a button on the lathe to stop cam waking. the button heads give me more room so i used them.Last edited by pat mccarthy; 05-08-2009 at 06:33 PM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance