Printable View
I am looking at 2.
One is in truck and still running. It's in a s-10 and has center bolt valve covers and a edelbrock carb. A similar set up that I am replacing.
The other was out of a 71 Monte and was running 6 mos. ago and has no carb., but edelbrock intake.
Both $300
Whadayathink?:confused:
both for $300 or $300 each????
Is either one a one-piece seal block and maybe a roller cam block???
$300 a piece. Different sellers.
I have non other info till i see them . I assume the one with the centerbolt valve covers has a one piece seal . But who knows. I would prefer that one. However the one that is out of the car looks better from the outside but can't hear it run. I am not going to rebuild, just want to put it in my 31 sedan and go.
I 'm leaning toward the one running because I have a similar one that is broke and if I need to may be able to combine parts and have one that runs .
Thanks for the help.
On another note ,how do I get e-mail notification to the threads . Does not seem to be auto. I'll check my settings.
I got it about the notification thanks anyway, CCB