Thread: heads and cam for my mild 79 350

Tweet

??? anybody

well ive done a little more research and this is my plan hope somebody responds. I am going to get a set of 062 vortecs, edelbrock performer intake, get the thin felpro gasket and the 270 mega cam has same duration and lift as the energizer cam i have with 108 lsa

Have you checked into the "Thumper" series of cams that Comp Cams sells. They are designed to give a nasty sounding idle without sacrificing drivability.

If I were a motor head I'd tell ya, but I just take them down and put them back together with help from friends... Lots of good engine guys here, you'll get a reply soon... Might be helpful if you let them know how you want this setup for... race, street rod, everyday driver, etc...

yeah i looked into those thumpers but the lift was to high for vortecs i just wanna use some z28 springs on the heads. The car is a street rod a little racing for fun i have a heavy foot though.