Thread: HELP - BEST rebuild kits for Holley 94 Carbs???

Tweet

IC2 - THANKS for the info and vote of confidence!! I am going to be running the 1" venturie center 94's as primary carbs and the other four will be the 15/16" 94's as secondaries. The guy who I bought the setup from is extremely knowledgeable about multi-carb inductions and that's what he recommended for my basically stock 327. He is also adamant about not having to dummy any of the carbs even on the street. His take is that if you got 'em, they all should work. I have found a guy who will rebuild the carbs for me at $50 each including parts/kits. I think I'll give it a try first and see how I do. I also have been reading about power valve selection and will probably have to order 2 - 3.5 power valves for the center 2 carbs since the standard valve in one 94 is usually 7.5 and a split of that would approximately equate to the 3.5 valves. It's quite possible that I'll have to block off the outer 4 carb's power valves but I will let my expert guide me on that decision. Again, thanks AND pictures of the whole process would not be a bad idea at all!!