Great article on the Holley 94’s here at Street Rodder
http://www.streetrodderweb.com/tech/...tor/index.html

The Hot Rod Company seems to have a pretty complete kit but it’s $25.
http://www.thehotrodcompany.com/shop...ct_id=91011596

Tansen Enterprises caters to (Sacramento, California) has a very complete kit at $37 each.
tanson@forwhatyouneed.com

Vintage Speed is just plain awesome -several kits, depending on what's needed, from $15 to $40 You should at least check out their web site!
http://www.vintagespeed.com/carbs.htm

Times six, well you can do the math. (But at this point, the cost of the kits is not an issue, eh?)

Have you checked with your local NAPA store? You may be really surprised at what they carry or can get for you. The 94 is a pretty simple and straight forward carb (Ford used them for twenty years from 1938-57!) and I’ve rebuilt several of them (a few years back!) with good results using kits from my local parts house.

Good luck and keep us all up to speed with your project. I really enjoy your posts and the enthusiasm you show in tackling this multi-carb induction system!

Regards,
Glenn