Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 350 idles great!
          
   
   

Reply To Thread
Results 1 to 9 of 9
  1. #1
    cody1bud is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2008
    Location
    bigfork
    Posts
    10

    Unhappy 350 idles great!

     



    i have a350 chevy that i rebuilt 12 or so years ago. it has had the same problem for years and i just keep parking the truck out of the way. the motor idles great. but flutters at high rpm. it wont even drive. when i try it just overheats and dies. i have reset the valves set timing and replaced everything except the quadrajet. what is my problem? i just took it to a mechanic and he set timing adjusted valves and it idles great. but thats it. he thinks that i didnt align the cam gears correctly. could this be it?

  2. #2
    C9x's Avatar
    C9x
    C9x is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2004
    Location
    N/W Arizona
    Car Year, Make, Model: Deuce Highboy roadster
    Posts
    1,174

    A quick test with a vacuum gauge will tell you.

    A stock cam engine in good condition will idle 17"-19" vacuum.

    With the cam a tooth or two off, vacuum levels will be about 15" vacuum.
    C9

  3. #3
    cody1bud is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2008
    Location
    bigfork
    Posts
    10

    thanks
    could this situation really exist? where should i get the vaccum from?

  4. #4
    cody1bud is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2008
    Location
    bigfork
    Posts
    10

    its an rv cam.

  5. #5
    Daffy427's Avatar
    Daffy427 is offline Banned Visit my Photo Gallery
    Join Date
    Aug 2008
    Location
    Gulfcoast Salvage 34224
    Car Year, Make, Model: The thing in the avatar
    Posts
    517

    Pick up the vacuum reading anywhere on the manifold..NOT on the carb...You could also have a fuel starvation issue

  6. #6
    cody1bud is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2008
    Location
    bigfork
    Posts
    10

    i switched carbs.... samw problems with both carbs

  7. #7
    ted dehaan's Avatar
    ted dehaan is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2003
    Location
    whittier ca.
    Car Year, Make, Model: 32ford5w,60fordstarliner,55chevy65corvai
    Posts
    645

    cody did you check the exaust sys to see if is restricted especialy if it has a cat. converter .....ted

  8. #8
    cody1bud is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2008
    Location
    bigfork
    Posts
    10

    should start it up today.
    pulled timing cover and found a second set of dots. key way on crank was at 12 oclock position on first set and i moved it over to 2 oclock on the other dot. does this sound correct? thanks cody

  9. #9
    cody1bud is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2008
    Location
    bigfork
    Posts
    10

    runs fine thanks

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink